Intermetallic相关论文
Porous FeAl alloys via powder sintering:Phase transformation,microstructure and aqueous corrosion be
This study investigates the phase transformation and microstructure of porous FeAl parts sintered from elemental powder ......
Intermetallic compounds based on rare-earth metals and iron are by far the most promising materials for permanent mag ne......
Synthesis of noble metal-based intermetallic electrocatalysts by space-confined pyrolysis:Recent pro
Noble metal-based intermetallics are promising electrocatalysts for sustainable energy conversion and consumption proces......
Effect of the potential function and strain rate on mechanical behavior of the single crystal Ni-bas
Molecular dynamics has been widely used to study the fundamental mechanism of Ni-based superalloys.However,the effect of......
Discovery of a new superconductor with distinct crystal structure and chemistry often provides great opportunity for fur......
ID010Effect of Post Weld Heat Treatment on Al 5052-SS 316 Explosive Cladding with Different Interlay
In explosive cladding,the chemical energy released from an explosive pack is employed to develop a metallurgical bon......
Yarlongite occurs in ophiolitic chromitite at the Luobusha mine (29°5′N 92°5′E,about 200 km ESE of Lhasa),Qusum Coun......
Wettability of molten Sn-Ag-Cu alloy on Cu substrate has been determined by sessile drop method, as well as its dependen......
The electronic structure and grain boundary segregation by boron addition——A binding energy shifting
The electronic structure and grain boundary segregation caused by boron addition to Ni3Al have been studied by X-ray pho......
The effects of high pressure on structure,elastic and electronic properties of the intermetallic Mg_2Pb were calculated ......
Rare-earth compounds have been an attractive subject based on the unique electronic structures of the rare-earth element......
The MPS/CAS Partner Group on the Chemistry and Physics of Inorganic Solid State Materials was formally established in 20......
Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,s......
The twinning in the intermetallic compound Al18Cr2Mg3 was observed and identified by transmission electron microscopy.Th......
LaCo_(13) has the highest 3d metal content,of any known rare-earth intermetallic compounds,a1.03MA/m saturation magnetiz......
Two nanostructured Al–Cu–Fe alloys, Al64Cu24Fe12 and Al62.5Cu25.2Fe12.3, have been studied. Icosahedral quasicrystalli......
The reduction of Tm(Ⅲ) on a liquid Zn electrode was investigated in a Li Cl-KCl melt via cyclic voltammetry,square wave......
Synthesis and Crystal Structure of Sm Cu_(7.73)In_(3.27): a New 3D Framework Based on [Cu_5In_4M_4](
A new intermetallic compound, SmC u7.73In3.27, has been synthesized by solid-state reaction of the corresponding pure el......
Review of magnetic properties and magnetocaloric effect in the intermetallic compounds of rare earth
The magnetocaloric effect(MCE) in many rare earth(RE) based intermetallic compounds has been extensively investigated du......
The magnetism and magnetocaloric effect in Er1-xGdxCoAl(x = 0, 0.1, 0.2, 0.4, 0.6, 0.8, 1) were investigated. The Er1-xG......
Effect of Y_2O_3 on microstructure and oxidation of γ-Ni+γ′-Ni_3Al coatings transformed from electro
The electrodeposited Y2O3-dispersedγ-Ni+γ′-Ni3Al coatings on Ni substrates were developed by the conversion of electr......
Based on Refs.[1, 2], a new method in determining the phase stability of alloys has been established by using the cryst......
Using a four-parameter model based on extended Miedema’ s cellular model of alloy phases and pattern recognition method......
Sn-Ag alloy system has been regarded as one of the most promising lead-free solder to substitute conventional Sn-Pb eute......
The phase constitutes and microstructures of TiAl_3 intermetallic compound solidified under vacuum and 5.5GPa pressure......
The coarsening behavior of L12 and D022 in Ni75AlxV25-x (x,at.%) alloys including coherent strain was investi-gated usin......
Ni3Al intermetallic was synthesized by hot pressing from element powders of nickel, aluminum, and boron. The influences ......
Three different bismuth-lead systems namely,Wood’s alloy(Bi50Pb25Sn12.5Cd12.5),Newton’s alloy(Bi50Pb31.2Sn18.8) and Ro......
The intermetallic compound (IMC) is hard and brittle,and its forming and growth at soldering joint interface is an impor......
Siliconizing Formation Mechanism and Its Property by Slurry Pack Cementation on Electro-deposited Ni
Silicide coating was prepared on electro-deposited nickel layer by the slurry pack cementation process on copper matrix ......
The three-layer clad materials consisting of Al(AA1100) / Mg(AZ31) / Al(AA1100) plate was fabricated by the hot roll bon......
Sn-rich Au–Sn solder bonding has been systematically investigated for low cost and low temperature wafer-level packagin......
Rare-earth intermetallic compounds formed in many R-Fe-Mn(R=rare-earth element) systems exhibit excellent properties. In......
Interfacial Characterization and Mechanical Property of Ti/Cu Clad Sheet Produced by Explosive Weldi
It was aim to investigate the interfacial microstructure and shear performance of Ti/Cu clad sheet produced by explosive......
对第三代镍基高温合金中γ/γ′和γ/Laves金属间化合物随合金中Ti、Al、Nb含量的变化的定量关系进行研究。结果表明,当合金(3GSA-......
The electrochemical behavior of Pr(Ⅲ) and formation process of Pr-Al intermetallics were investigated by different elec......
For many years, cerium-aluminum systems have been extensively studied because of their unusual magnetic behaviors. As at......
Fe-rich intermetallics, especially β-Fe phase, usually forming in the microstructure of cast aluminum alloys, are very ......
THE SYNTHESIS AND CRYSTAL STRUCTURE OF LaPd_5—An Experimental Confirmation of Computerized Predictio
A series of new intermetallic compounds of rare earth metals,includingLaPd_5、EuNi_2,EuFe_2 etc.,have been prepared to ......
The Al2O3-TiB2 coatings were fabricated on Q235 steel by self-propagating high-temperature synthesis(SHS)process using a......
This paper presented a novel study on electrochemical codeposition of Mg-Li-Yb alloys in LiCl-KCl-KF-MgCl2-Yb2O3 melts o......
The cyclic voltammetry, convolution voltammetry and chronopotentiometry were used tostudy the electrode process of Nd (......
In Situ Synthesis of Titanium Nickel Intermetallic Compounds Layer and TiN Coating By Laser Cladding
Laser cladding,together with laser nitriding was used to synthesize a titanium nickel intermetallic compound layer on th......
The stable ranges concerning the composition and temperature have been experimentally de-termined for the intermetallic......
Investigation was made of the ductility and microstructure of a series of cast Ni_3Al-base al-loys,with 19—23 at.-% Al......
The creep fracture behavior of intermetallic compound(Fe_(60)Ni_(40))_3(V_(98)Ti_2)has been studied.The variation of di......
Equilibrium equation of point defects in Ll_2 type intermetallic compounds was established tocalculate the relations of......
1.IntroductionThe research of the TD1 and TD2 al-loys based on intermetallic compound Ti_3Al,which possesses high tempe......
The superplasticity of Ti_3Al intermetallic compounds has been investigated in this paper.TheTi-14Al-21Nb ternary alloy......
The compound ingots of Pr0.15TbxDy0.85-xFe2 (x=0 to 0.85) were prepared by arc melting in a water Cu boat using arc furn......
